CATHEREEPLUS™ I.V. SLIT

Play/Pause

The product is a slit type of CATHEREEPLUS ™. The peripheral vein catheter and CV catheter can be fixed and the insertion site can be observed. It contributes to unification of procedures in hospitals and reduction of treatment time.

Product information compliant with
EU Medical Device Regulation (EU MDR)

CATHEREEPLUS ™ with "easy to use".

CATHEREEPLUS ™ I.V. SLIT follows the concept of CATHEREEPLUS ™, and slit catheter dressing
Peripheral venous catheters (IVS0709) and CV catheters (IVS0810) are available in different sizes and shapes. This product has the feature that it has a fixing force, the insertion part can be observed, and it sticks well. It is a new type of dressing that is easy to apply because it is carrier-less and has good operability when wearing gloves.

EOG sterilized

• The product is used for fixing injection needles and catheter insertion sites.

With "diamond window", easy positioning when applying

• The puncture site is visible from the diamond window, so you can apply it to the exact position. It can also be applied while wearing gloves.

Carrier-less design allowing neat application

• Carrier-less type that can be applied as it is after peeling off the release liner. Can be applied without gaps.

No-hassle integrated tape

• IVS0709 (for peripheral venous catheters)
  The thin tape can also be used for direct fixing of indwelling needles and Ω-shaped fixing of tubes.
  The thick tape can be used for looped tube fixing.

• IVS0810 (for CV catheters)
  The slit allows secure fixing of CV catheters.
  Can also be used for tube fixing.

The observation window is made of CATHEREEPLUS ™.

• CATHEREEPLUS ™ uses a newly developed urethane gel adhesive. As a result, this dressing has become "highly moisture-permeable" (compared to our company), and has achieved both "gentle to skin" and "high adhesion" at a high level.

1. 1
   

   If necessary, temporarily fix the indwelling needle with the included fixing tape.

2. 2
   

   After firmly fixing the indwelling needle, peel off the release liner of each handle and attach it so that it fits the skin.

3. 3
   

   Peel off the second thin fixing tape from the dressing tape for use.

4. 4
   

   Use this tape to fix the route to the Ω shape while maintaining the angle of the indwelling needle.

5. 5
   

   It is used for fixing lines such as loops with wide tape. This is completed.

• 1.
  Important basic cautions

  • 1)
    Clean and dry the area around the insertion site before applying the product.
  • 2)
    Choose the appropriate size product for your purpose.
  • 3)
    Do not apply with the product extended, as it may cause skin damage and peeling.
  • 4)
    If symptoms appear to be infection or skin disorder (rash / redness, blisters, skin peeling, itchiness, etc.) on the application site, discontinue use and take appropriate treatment.
  • 5)
    During application of this product, observe the fixation condition of the catheter and peeling of the tape, etc., and reinforce the fixation or replace this product as necessary.
  • 6)
    When showering, be careful not to allow water to enter the puncture site. If water gets into the puncture site, replace this product.
  • 7)
    When removing, peel off slowly along the flow of the body hair to prevent skin damage.
  • 8)
    When removing the product, take care not to remove the catheter or other devices while holding down the catheter or skin.
• 2.
  Additional cautions

  • 1)
    Do not use this product if its packaging is soiled, damaged or wet.
  • 2)
    Use immediately after opening the package.
  • 3)
    When removing, peel off slowly along the flow of the body hair to prevent skin damage.

• Store at room temperature, away from water, high temperatures, high humidity, and direct sunlight.

Return to [Wound Care Dressings]