CATHEREEPLUS I.V.

IV set
Internal carotid triple lumen
Peripheral fixing
Epidural

Dressing for fixing catheter puncture site. This product is a combination of CATHEREEPLUS and flexible polyurethane non-woven fabric, which firmly secures the catheter and makes it easy to observe the insertion part.

Product information compliant with
EU Medical Device Regulation (EU MDR)Opens in a different window

Overview

The product secures the catheter.

The product is a flexible polyurethane non-woven material with a central diamond window. The window part is "CATHEREEPLUS, a highly moisture-permeable film dressing. The dressing can be easily applied and the puncture site can be observed.

EOG sterilized

Usage

  • The product is used for fixing injection needles and catheter insertion sites.

Features

With "diamond window", easy positioning when applying

  • The puncture site is visible from the diamond window, so you can apply it to the exact position.

Carrier-less design allowing neat application

  • Carrier-less and highly flexible polyurethane non-woven fabric allows it to be firmly adhered to the skin without gaps.

Stick firmly using the attached fixing tape.

  • As the attached fixing tape can be applied without touching the adhesive surface, it can be handled hygienically. Can be applied with gloves on.

The observation window is made of CATHEREEPLUS .

  • CATHEREEPLUS uses a newly developed urethane gel adhesive. As a result, this dressing has become "highly moisture-permeable" (compared to our company), and has achieved both "gentle to skin" and "high adhesion" at a high level.

Directions

Example of application when a catheter is fixed to a peripheral vein

  1. 1

    Attach the included fixing tape to the connector on the indwelling needle side.

  2. 2

    Grasp the release liner at both sides of CATHEREEPLUS I.V. and apply so that the puncture site is in the center of the the window.

  3. 3

    Apply the product along the catheter so that the product is in close contact with the catheter, and peel off the release liner at both sides.

  4. 4

    Apply the second fixing tape to the tube in a Ω shape.

  5. 5

    Use the remaining fixing tape to fix looped tubes.

Precautions

  • 1.
    Important basic cautions
    • 1)
      Clean and dry the area around the insertion site before applying the product.
    • 2)
      Choose the appropriate size product for your purpose.
    • 3)
      Do not apply with the product extended, as it may cause skin damage and peeling.
    • 4)
      If symptoms appear to be infection or skin disorder rash / redness, blisters, skin peeling, itchiness, etc.) on the application site, discontinue use and take appropriate treatment.
    • 5)
      During application of this product, observe the fixation condition of the catheter and peeling of the tape, etc., and reinforce the fixation or replace this product as necessary.
    • 6)
      When showering, be careful not to allow water to enter the puncture site. If water gets into the puncture site, replace this product.
    • 7)
      When removing, peel off slowly along the flow of the body hair to prevent skin damage.
    • 8)
      When removing the product, take care not to remove the catheter or other devices while holding down the catheter or skin.
  • 2.
    Additional cautions
    • 1)
      Do not use this product if its packaging is soiled, damaged or wet.
    • 2)
      Use immediately after opening the package.

Storage Instructions

  • Store at room temperature, away from water, high temperatures, high humidity, and direct sunlight.

Specifications

Product number Size Per box
Adhesive area Observation area Catheter
fixing tape
IV0608 60mm x 80mm 34mm x 39mm 15mm x 80mm × 3 sheets 35 sheets
IV0811 80mm x 110mm 44mm x 51mm 30 sheets

Share this page